When it comes to regulating the temperature in your home, there’s hardly a better way than using heat pump water heaters. They are powered by natural gas, which is a bit more expensive than electricity, but provides more heat generated and it heats the water much faster.
While the refrigerator heats the room while heating the water, the heat-pumped water tank uses the heat from the room to heat the water and in the process the room gets cooler.
Here are the most important things you need to know about the heat pump water heaters.
There are many factors that affect the performance
Since the heat pumps efficiency depends on the room temperature, it is best to put the water heaters inside of a warm room, out of the reach of the cold temperatures. It is also important to prevent heat loss in this space, and this can be accomplished using eco-friendly insulation and double glazed windows. A recent study pointed to the fact that heat pump water heaters generated more power in the rooms where temperature was higher than those in the rooms where the temperature was lower, and that those homes that used more hot water spent lesser amounts of money. This is owing to the fact that the heaters produce a lot of hot water at once, and if used all at once, you won’t need to use them again later on.
Where is the best place to put the heat-pump water heaters?
Basically, it all depends on where you live: if you live in a hotter climate, keep the heaters inside a garage or outside of the house, but if you live in a colder climate, you have to keep it inside the basement. If you do not have a basement, feel free to keep it inside one of the utility rooms, as long as there is enough free space for it. According to a highly-rated plumber from Sydney, the performance of the heaters will vary from one room to another, due to the difference in temperatures. There are several requirements, like having a room big enough to fit the heaters, the temperature of the room has to be at least 50 F, the ceiling has to be tall enough, and the room must be spacious enough to allow constant air flow. All of these requirements have to be met in order to install a heat-pump water heater.
Do they steal the space’s heat?
The answer is yes. Heat-pump water heaters are like scavengers, absorbing all of the nearby heat and using it to heat water faster. Again, this problem is easily solved if you are living in a hot climate, or if keeping the heaters inside the basement or a garage extension. But, if you are living in a colder climate and are keeping the heaters inside a utility room, your furnace and other heating mechanisms will have to work around the clock to provide additional heat to your home. This is the tricky part, but if you position your heaters in a proper room where heat generated is enough to keep them running, you will solve all the temperature related problems and in the process, save money.
How much money do you save by going with the heaters?
An average person uses around $1,400 to $2,700 to install the heat-pump water heaters, and the annual saving starts from the lowest possible amount, which is $40, and goes up to $300. With each passing year, you will save more and more money, and looking at the long run, installing these heaters will save you a lot of money, thus being the reason why families who decided to settle down go for the heat-pump water heaters over the common boilers, and save both money and electricity.
The lifetime of the heat-pump water heaters is approximately 10 to 12 years, after which you would have to replace the heaters in the worst possible scenario, investing another $400-$800. A refrigerator lasts approximately 5 to 7 years, after which you would have to get a new one. So if you are among those who want to save money and in the process have their water heated quickly, go for the heat-pump water heaters and the hot water will never again be a problem.
